Friday, December 13, 2019

Clawbot Page


If you are from outside our district, requesting access does not work.  All of my files are set to "shared" with anyone whom has the link, the videos are being blocked at the district level on both sides.  If you have your teacher email me at cjohnson10@sandi.net, I will gladly share all of my files. PLEASE do not "request access" it does not do any good.
For the PDF instructions – Please Click Here

For step by step video instructions – Please Click Here

Helpful Hints for the Clawbot Build

To watch this on YouTube - https://youtu.be/IEufD6C2n9I

By the end of this video, you should be able to:
     Assemble the claw and arm for your Clawbot
     Add a limit switch and extension cable to your Clawbot
     Add a bump switch to somewhere on the chassis of your Clawbot


Moving Forward

To watch this on YouTube - https://youtu.be/-SoRblKTbv0

By the end of this video you should be able to:
     Set up the motors and sensors needed for your Clawbot.
     Move your Clawbot forward for 1 second at full speed on the classroom floor.
     Move your Clawbot forward for 1 second at half speed on the classroom floor.
     Move your Clawbot forward for 1 second at quarter speed on the classroom floor.

Point Turns

To watch this on YouTube - https://youtu.be/hZMtP0fA2vY

By the end of this video you should be able to:   
     Make a 90 degree turn to the left
     Make a 90 degree turn to the right


Swing Turns

To watch this on YouTube - https://youtu.be/OQq6rScrqI0

By the end of this video you should be able to:
     Make a 180 degree U-turn to the left
     Make a 180 degree U-turn to the right



LABYRINTH PART 2

To watch this on YouTube - https://youtu.be/WAI1oHPVJKs